IEEE Std 1505.3 pdf free download
IEEE Std 1505.3 pdf free download.Universal Test Interface Framework and Pin Configuration for Portable/Bench Top Test Requirements Utilizing IEEE 1 505TM Receiver Fixture Interface Standard.
1.5.4 Rules, recommendations, suggestions, permissions, and observations
Rule: Rules .shall be followed to ensure compatibility to IEEE Std 1505.3Th1_2015. A rule is characterized by the use of the words slit:!! and shall nor. These words are not used for any other purpose other than stating rules.
Recommendation: Recommendations consist of advice to applicants which will affect the usability of the final device. Discussions of particular hardware to enhance throughput would fall under a recommendation. These should be followed to avoid problems and to obtain optimum performance.
Suggestion: A suggestion contains advice which is helpful but not vital. The reader is encouraged to consider the advice before discarding it. Suggestions are included to help the novice designer with problematic areas of the design.
Permission: Permissions are included to clarify the areas of the specification that are not specifically prohibited. Permissions revalidate the reader that a certain approach is acceptable and will cause no problems. The word may is reserved for indicating permissions.
Observation: Observations spell out implications of rules and bring attention to things that might otherwise be overlooked. They also give the rationale behind certain rules so that the reader understands why the rule must be followed.
2. Normative references
The following referenced documents are indispensable for the application of this document (i.e., they must be understood and used, so each referenced document is cited in text and its relationship to this document is explained). For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments or corrigenda) applies.
IEEE Std 1505-2010, IEEE Standard for Receiver Fixture Interface3
IEEE Std 1505.1-2008. IEEE Standard for the Common Test Interface Pin Map Configuration for High-
Density, Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505-2010
3.1 Definitions
For the purposes of this document, the following tenris and definitions apply. The IEEE Standards Dictionary Online should be consulted for terms not defined in this clause.5
combination framework: Represents IEEE Std 1505-2010 framework that combines segmented and continuous designs in a single tier interface.
dual slot connector module: Is a two-slot wide iEEE Std 1505-20 10 connector that applies a mixed pin configuration and applied to the Standard.
open architecture: Describes the layered hierarchical structure, configuration, or model of a communications or distributed data processing that enables system description, design, development, installation, operation, improvement, purchase. and maintenance to be performed at a given layer or layers in the hierarchical structure without directly impacting another layer.
plug-on cable interface: Is a cable assembly with quick-disconnect connector that for standard applications permits direct jackscrew interface to a receiver without a fixture framework.
scalabilitv: The ability to provide functionality either upward or downward in a graduated series.
IEEE Std 1505.3 pdf download.
